TCT Saw Blades vs HSS: Choosing the Right Blade for the Job

The choice between TCT (tungsten carbide tipped) and HSS (high-speed steel) blades looks technical from the outside, but the rule of thumb is simple. TCT for wood, MDF, plastics and aluminium; HSS for steel and stainless. Choose the wrong one for the material and the blade goes blunt or shatters — sometimes in the first cut.

TCT blades are the standard on circular saws, mitre saws, table saws and reciprocating saws cutting wood and sheet material. The carbide teeth hold an edge through hundreds of metres of cut, take the impact of knots and embedded nails better than HSS, and run cleanly through dense board. Tooth count drives the finish: 24T for rip in softwood, 40–48T for general crosscut and sheet, 60–80T for clean hardwood and laminate. For aluminium and non-ferrous, look for a triple-chip-grind TCT rated for non-ferrous work — a wood blade will throw teeth on aluminium. See the full range under saw blades and cutting tools.

HSS comes into its own on metal-cutting work. HSS-G drill and milling bits, HSS-Co cobalt bits in stainless, and HSS hole saws for mild steel are the right family. On reciprocating saws, HSS blades take mild steel and aluminium where TCT would chip; bi-metal blades — HSS teeth on a flexible carbon-steel back — are the modern compromise that handles wood-with-nails work without shattering. For drilling specifically, the family overlap is covered under drill and screwdriver bits.

The mistakes that come up most often are: an old HSS circular blade put on a cordless circular saw — the lower RPM masks the wrong-blade signs until the cut starts burning — and a TCT jigsaw blade run through 3mm steel, which strips the teeth off in seconds. Match the blade to the material, every time, and the saw will outlast the blade by years.

If the saw itself is tired — weak, sparking, stopping under cut — brushes are the first place to look. Direct fitments by brand are at carbon brushes for power tools. For the full saw spares picture, the tool parts hub is the cleaner starting point.

Related guides

Back to blog